You can tweak the appearance of CMYK and RGB jobs by
adding or subtracting color, or by changing the brightness, contrast,
saturation and sharpness.
You cannot make color adjustments to multi-color
jobs, jobs that contain spot colors, or grayscale jobs.
- Do one of the following:
-
In Server Manager:
On the sidebar, click Printers, and select a printer. In the printer's tree
view, select a workflow. On the Color tab, expand the Color
Adjustment panel. In the panel header bar, select the check box to activate the
settings.
-
In Job Editor: On the
Color tab, expand the Color
Adjustment panel. In the panel header bar, select the check box to activate the
settings.
- Select Apply color corrections
to static wedge (optional).
In a proofing environment, color consistency must
be measurable. By applying the changes to the control bar, you can check that the color adjustments
have been applied to all jobs.
This
setting is available for CMYK jobs with a static media wedge only.
You cannot apply color corrections to a dynamic wedge.
- Add or subtract color for each color channel, as required.
Command WorkStation detects automatically the color space of each job.
- Increase or decrease the brightness, contrast
and saturation settings, as required.
-
Increase or decrease the blur/sharpen setting, as required.
-
Under Presets, click Save to create a preset of
the current settings (optional).
In Job Editor,
you can compare the effect of your color adjustments with the original by alternately clearing and
reselecting the check box in the tab header bar.