Fiery XF 7.1

Hide or show navigationPrevious topicNext topicSharePrintPDF

Configure a network printer

You can connect to a printer through its IP address.

  1. Under Connection type, select Print via IP network, and type the printer’s IP address.
  2. Select the type of TCP/IP protocol that your printer uses for data transfer.

    Most printers support the RAW protocol and print to port 9100. The LPR protocol is normally reserved for Unix systems or print servers with multiple interfaces. In most cases, you can leave the box blank. Refer to your printer manual or ask your system administrator if you are unsure.

    Note: EFI VUTEk printers communicate through port 8013.