Color mode settings
The Color mode settings specify the output color space (CMYK, for example). If you change the Color mode setting, color management options are reset to the server default settings.
Depending on the Color mode setting you select, the whole job will be printed in grayscale, CMYK, or CMYK+.
Note: CMYK output refers to press output of at least
four process colors. If your press or printer supports RGB
output, and not CMYK output, all references to CMYK in the Fiery Command
WorkStation Help do not
apply. For information about a press or printer that supports
RGB output exclusively, see the product-specific documentation.
The possible settings for color mode are:
- Grayscale for a grayscale or black-and-white document.
- CMYK for a color document.
- CMYK+ prints color output
with CMYK colorants plus additional colorants where available, using all colorants
as process colors. One to three additional colorants may be available for your Fiery
server, if supported.
To use CMYK+ only for spot colors, select the Use CMYK+ only for spot colors option. When this option is selected, you can specify output profiles for both the CMYK+ spot color content and for the non-spot colors.
Note: CMYK+ is not available for all Fiery servers.