Define the default handling of jobs sent to the USB port of the Fiery Server. Users can use the USB port on the Fiery Server to connect a Windows computer or a USB device that contains files to
print.
Important: There are two versions of
Configure and they are specific to the
Fiery Server you are connected to. This is a combined procedure that
describes what to do when connected to a
Fiery Server with FS100/100Pro or earlier, and notes about what to do
with FS150/150 Pro or later. If you are not sure which version of Configure
you are using, see
Which version of Configure am I using?.
- From Configure, choose .
Note: If you are connected to a Fiery Server with FS150/150Pro, you can
find the settings mentioned in this procedure in instead.
- Select Enable USB Port.
- Choose settings for these options:
Ignore EOF Character - Specifies that the
Fiery Server ignores end-of-file (EOF) messages in a file. Under normal
circumstances, leave this option cleared. To print PostScript files in binary format (not ASCII),
enable this option. When this option is selected, the Fiery Server uses
the USB port timeout value to determine when the end of the file has been reached. However, if you
experience printing problems, clear this option.
Port Timeout - The number of seconds the
Fiery Server waits without receiving data from the USB port before
deciding that the current job is complete. Until the timeout, the Fiery Server cannot receive new jobs through the USB port, but it can continue to receive network print
jobs.
Default queue - The print connection where
jobs printed to the USB port are sent. Only the print connections that you published are displayed.
This list can also include virtual printers that have been defined (if the Fiery Server supports this feature).
- To allow users to print jobs automatically when they connect a USB media device to the USB port
on the Fiery Server, choose a setting from Autoprint.
Jobs are printed as soon as the USB device is connected to the Fiery Server.
-
Apply or save your changes.
For more information about automatic printing from USB
devices, see Configuration and Setup,
which is part of the user documentation set.
