Configure Bonjour

Bonjour allows for zero configuration while you set up, install, add, or remove the Fiery Server from the network. This allows Mac OS computers to detect and connect to the Bonjour-enabled Fiery Server for printing.

Important: There are two versions of Configure and they are specific to the Fiery Server you are connected to. This is a combined procedure that describes what to do when connected to a Fiery Server with FS100/100Pro or earlier, and notes about what to do with FS150/150 Pro or later. If you are not sure which version of Configure you are using, see Which version of Configure am I using?.

From Configure, choose Network > Services > Bonjour.
Note: If you are connected to a Fiery Server with FS150/150Pro, you can find settings mentioned in this procedure in Network > Bonjour instead.
Select Enable Bonjour.
Type the Bonjour Service Name.
From the Preferred Printing Protocol list, select the protocol that the Fiery Server uses when using the Bonjour service.
The list displays only the protocols that you have enabled; the Default queue displays the print connection for the selected protocol.

This information is read-only. If no default connection can be defined (such as for IPP), the Print queue is used.
Apply or save your changes.