To verify color accuracy, you must select reference data, and define acceptable dE tolerances. You must also print your jobs with a job label. The job label can consist of one or two control bars, which must be compatible with your measuring device.

1. Do one of the following:
   • In Server Manager: On the sidebar, click Printers, and select a printer. In the printer's tree view, select a workflow. On the Verify tab, expand the Control Bars panel.
   • In Job Editor: On the Verify tab, expand the Control Bars panel.
2. Select a control bar, which can also be a dynamic wedge.

   The following table shows which type of control bar is suitable for each reference:

   Type of control bar	Reference profile	Measurement file from remote container	SWOP/GRACoL	Fogra characterization data
   EFI Chart	Yes	Yes	No	No
   IDEAlliance ISO 12647-7	Yes	Yes	Yes	No
   Ugra Fogra-MediaWedge	Yes	Yes	Yes	Yes
   Dynamic wedge	Yes	No	No	No

3. Under Measuring device settings, make sure that your measuring device is selected (dynamic wedge incorporated into a Fiery Verify workflow only). Device-specific settings are available for some measuring devices. For example, you can select a measurement condition (M0, M1 or M2). For more information, see Measuring device settings.
4. On the Verify tab, expand the Verify Control Bar 1 panel. In the tab header bar, select the check box to activate the settings.
5. Select Print label after verification automatically (optional).

   Some printers with an integrated measuring device can print out a label with the results of the color verification. The label includes all the necessary ISO 12647-7/8-compliant information and is printed regardless of whether the job passes color verification or not. Alternatively, by selecting Print only if verification results passed, you can specify that a label is printed only if all the measured results are within the defined tolerances.

6. Select one of the following references:

   • the reference profile

   • an MKCheck 10 or MKCheck 11 characterization data set

   • the measurement file from a remote container

7. Under Target tolerances preset, define the highest acceptable error margin when verifying the color accuracy of the printout. Do one of the following:

   • Select a tolerance preset for a recognized standard.

   • Select a custom tolerance preset.

   • Define or create custom tolerance presets (house standards) by editing existing or creating new presets. Custom tolerances provide an easy way to adapt quickly to the latest norms.

   • Create new custom tolerance presets easily using the Server Manager.

   Note:

   Jobs are verified as color accurate only if all color measurements are within the defined dE tolerance limits. In Verifier, you can force jobs to be verified if some dE values are marginally exceeded.