You can create a profile for a printer connected to a Fiery XF server. The Fiery XF server must be accessible from your computer over the network.

1. In Color Profiler Suite, start Printer Profiler and click Print Patches.
2. In the Welcome window, click Select XF Server and select the Fiery XF server from the list. Under Printer description, select the printer to profile.

   If the server is not in the list, click the plus sign to add the server using the IP address or by searching.

3. Select ink, media, and calibration set appropriate for the printer and the paper that you are using.
4. Select the settings for creating the measurement pages.

   • If desired, click Settings to select the settings for the measurement instrument.

   • If desired, for a four-color (CMYK) printer, click Expert Settings to adjust the maximum densities for CMYK. For printers that support more than four colors, click Expert Settings to adjust the settings for the additional colors.

5. Save the measurement page ID.
6. Specify print settings and click Print.
7. Retrieve the measurement pages from the printer and follow the on-screen instructions to measure the measurement pages.
8. Save the measurements.
9. In the Summary window, check the results.

   Click the Help icon for more information about inspecting measurements and averaging measurements.

10. In the Apply Settings window, select the profile settings or import settings from an existing profile.
11. In the Save Profile window, specify the desired settings and confirm that Install on XF Server is selected.

    The profile is created and installed on the Fiery XF server.