Save and install device link profiles

Device Linker lets you process, save, and install the device link profile(s) on a Fiery server. If you are not creating a device link profile to match to a standard, you can save the device link profile locally.

When you create a device link profile on a Fiery server, Device Linker automatically sets the profile association settings. (These settings determine how the job enables the device link profile).

If a job specifies the associated source profile as its CMYK Source Profile or RGB Source Profile and the associated destination profile as its Output Profile, the device link profile is enabled for the job.

If an associated source profile or destination profile does not already reside on the Fiery server, it is installed along with the device link profile, so that it can be selected to enable the device link profile.

Type the profile’s description.
Optionally, type additional information under Comments.
Do one of the following:
- If you are not creating a device link profile to match to a standard, click Install on Fiery Server and select the Fiery server from the list.
- If you want to save the profile locally, click Save on local drive.
Note: If you are creating a device link profile to match to a standard, the profile is installed on the Fiery server that you selected previously.
Click Next.
If you are saving the profile locally, navigate to the new profile’s location, type a file name, select the ICC profile type (v2.0 or v4.0), and then click Save.
Note: The default location for profiles is the folder where the operating system installs profiles.