The percentage of recycled material in the media.

Indicates the type of pre-process coating applied to the back side of the media sheet.

The percentage of light reflected by the back side of the media when it is viewed under illumination with a 75-degree angle of incidence. A higher percentage of reflection indicates a higher gloss value.

Light reflectance of the media used. Enter a value from 0% (low reflectance) to 100% (high reflectance).

The device-independent color of the media. Specify the color using CIE L*a*b* values.

Describes how neutral, unsaturated, or non-chromatic the media is. Specify the media tint using values in the CIE xyz coordinate system. A coordinate of 0 indicates a perfectly neutral tint in the red-green axis.

Describes the amount of overall light reflected by the media, as measured across the entire visible spectrum. Specify the reflection amount using values in the CIE xyz coordinate system. A coordinate of (100, 100, 100) indicates perfect whiteness.

Color of the media used. To indicate translucent media, choose a "Clear" color option.

Custom color of the media used. If your desired color does not appear in the Color menu, type the name of your custom color into this field.

Descriptive information that would enable a user to order more of this media.

The Flute/Grain direction attribute specifies the direction of the fluted substrate as it feeds into the printhead.

Choose from the following options:

• None - This is the default.

• Short - The short edge of the fluted substrate as it feeds into the printhead.

• Long - The long edge of the fluted substrate as it feeds into the printhead.

The type of pre-process coating applied to the front side of the media sheet.

Default color profile applied only to the front side of the media. This attribute can be overridden by specifying a different color profile in Job Properties. Appears in both the PPD based and JDF based settings.

The percentage of light reflected by the front side of the media when it is viewed under illumination with a 75-degree angle of incidence. A higher percentage of reflection indicates a higher gloss value.

Specifies which side(s) of the media support print imaging.

The PPD setting for the color of the media to be used. JDF settings for color of media include Color name and Custom color name.

The PPD setting for weight of the media used, measured in grams per square meter (gsm) or pounds (lbs). The similar JDF setting is Weight.

Descriptive name for the catalog entry to describe the media. Type the desired name into this field.

The media's percentage of opacity. 0% represents full transparency, and 100% represents full opacity.

Displays the width and height dimensions of the media used.

When the check box is selected, the media contains pre-printed content. When the check box is cleared, the media is not pre-printed.

Choose from the available printing technologies.

Part number, item code, article number, or other identifier for the media used, as defined manually by the print operator, or by a Management Information System (MIS).

Defines the number of pieces in a grouped media set.

Thickness of the media used, measured in microns.

Stock type of the media used. Choose from the following options:

• Paper - Standard fiber-based paper stock.

• Transparency - Transparent media stock designed to be viewed through projection.