Verify color consistency in Verifier
You can verify the color consistency of your jobs by printing out a control bar and measuring it against a selected reference. You can also verify a house standard by verifying saved measurement data against a selected reference.
The steps below are an example of how you can achieve ISO 12647-7 compliance. However, you can verify any suitable combination of sample data against a reference.
Before you begin:
Make sure that you have set up Verifier for color verification.
Verify by measurement only: Set up and connect your measuring device to the computer.
Verify by data comparison only: Make sure that saved measurement data is available.
- Start Verifier.
- For the first set of measurement values (reference), click Open, and do one of the following:
Verify by measurement: From the Fogra_MKCheck11 folder, load a Fogra characterization data set—for example, Fogra39.it8 (for ISOcoated_v2_eci.icc).
Verify by data comparison: Load the Ugra/Fogra media wedge measurement data.
- For the second set of measurement values (sample), do one of the following:
Verify by measurement: Click Measure, and measure the media wedge.
Verify by data comparison: Click Open. From the Fogra_MKCheck11 folder, load a a Fogra characterization data set—for example, Fogra39.it8 (for ISOcoated_v2_eci.icc).
You can now print out the verification results.