You can print a control bar for each job. For nestings, you can select two
control bars—one for the nesting, and one for each nested page.
If you apply color management to the control bar,
Command WorkStation compresses the color patches into the color
gamut of the selected reference profile. If you do not apply color management, Command WorkStation prints the control bar using the full color
gamut of the printer.
Note: Some printers with an embedded measuring device
can measure only one control bar per job.
-
Do one of the following:
- In Server Manager: On the sidebar, click Printers, and select a printer. In the
printer's tree view, select a workflow. On the Verify tab, expand the
Control Bars panel.
- In Job Editor: On
the Verify tab, expand the Control Bars
panel.
- Under Control bar 1,
select a control bar or media wedge.
Make sure that you select a control bar that is
compatible with your measuring device.
- Do one of the following:
- Select Print
with color management to check the accuracy of the media profile.
- Clear Print
with color management to check the color accuracy of two printers with each
other.
- Select Use on
nesting sheet instead of job sheet to print a control bar for the nesting
(optional).
- Repeat the above steps for control bar 2
(optional).
Now watch the video
here.
