Before measuring measurement pages, be sure that the measurement instrument is connected properly. Calibrate the instrument if instructed to do so.

1. Place the first measurement page in or on the instrument.
2. If page registration is required, follow the on-screen instructions to register the page location.
3. If the instrument requires you to scan the patches manually, follow the on-screen instructions to scan each strip.
   Note: In some cases, an invalid measurement may be detected even if you measured the correct strip. Measure the strip again to confirm the correct strip was measured. The error message does not affect the measurement process, and the measurement instrument will complete the measurement successfully.
4. After you successfully measure a page, you can check the measurements.

   If any measurements are not as expected, you can remeasure the strip if your instrument supports manual scanning.

5. Continue to measure any remaining pages.
6. After you measure the last page, click Next.