Measure with Spectro Swing qb

You can measure color patches on a page using the Barbieri Spectro Swing qb.

Before you measure pages, be sure that the Spectro Swing qb and your computer are both connected to the same subnet of your local area network. FieryMeasure automatically locates the Spectro Swing qb if it is in the same subnet as the client computer searching for it. Contact your network administrator if you are unsure.

Connect the Spectro Swing qb to your computer and turn on the Spectro Swing qb.
Calibrate the Spectro Swing qb.
To learn about the Spectro Swing qb, see the documentation that accompanies the instrument.

The Spectro Swing qb is connected to your computer through your local area network rather than through a USB connection. The Spectro Swing qb can be used to measure pages for multiple computers on the network.

When you have successfully measured a page, you can check the measurements if desired.

When you select the Spectro Swing qb as your measurement method, you can set the instrument settings.

Measurement mode - Select the type of measurement that you want. You measure each strip in a single pass.

M0 - One pass, UV included
M1 - One pass, D50 UV included
M2 - One pass, UV cut

You can set the patch size to one of the available sizes: Normal (Default), Medium, and Large. The measurement method is the same for all patches regardless of patch size.

You should select your connection setting by choosing USB or Network.

When a page has been successfully measured, you can check the measurements. If any measurements are not as expected, you can remeasure the strip.

Place the first measurement page in the instrument.
Continue to measure the remaining measurement pages (if any) in the same manner as the first until you have measured all pages.
After the last page has been measured, click Next.

Fiery Command WorkStation

FieryMeasure Help

Measure with Spectro Swing qb