1. Select a job in the Held list in Command WorkStation and open Fiery Impose in one of the following ways:
   • Select Impose from the Actions menu.
   • Right-click the job and select Impose.
2. In Fiery Impose, select Edit > Preferences > Finishers.
   Note: On Windows computers, you set Fiery Impose preferences in Edit > Preferences. On Mac computers, preferences are under the Fiery Command WorkStation menu in the Fiery Impose window.
3. Select the Allow finisher integration check box to specify settings in the Finisher Integration section.

   You can clear this check box when the finisher is not used.

4. Select the desired finisher from the Select device list.
   Note: Creating a finisher preset is currently supported depending on your finisher.

When you have selected your finisher, specify the following additional settings:

5. To access the installation folder located on the Duplo PC Controller computer, do one of the following:
   • In PC controller path, specify the path to the installation folder on the Duplo PC Controller computer.

     The installation folder contains configuration files with details about import and export folders that you created on the Duplo PC Controller computer.

   • Click Browse to select the installation folder on the Duplo PC Controller computer and populate the Preset path field.
   Note: The Duplo PC Controller computer requires a minor change in its configuration to enable the integration with Fiery Impose. For more information, see the documentation that accompanies the Duplo PC Controller software.

   You can click Test to test the connection between the Fiery server and the computer with the Duplo PC Controller software.

   You can also click Import presets to import backed-up or downloaded presets.
   Note: The imported presets are listed in the Finisher Preset window.
6. Specify the number of perforation modules available on the finisher from the corresponding list.

   Finisher module	Description	Supported finisher
   CPM	The Cross Perforation Module (CPM) is an optional module installed on the finisher to support horizontal or cross perforation and horizontal scoring. Perforation is performed parallel to the feeding edge. If the job requires horizontal perforation, a minimum of one CPM module must be available for use on the finisher. To perform horizontal perforation, you must select the number of modules available on the finisher.	Duplo DC-618
   CPM	The Cross Tool Module (CPM) is an optional module installed on the finisher to support horizontal or cross perforation. Perforation is performed parallel to the feeding edge. If the job requires horizontal perforation, a minimum of one CPM module must be available for use on the finisher. To perform horizontal perforation, you must select the number of modules available on the finisher.	Duplo DC-648
   CRM	The Creaser Up Module (CRM) allows crease up (mountain), in addition to standard crease down (valley), horizontally across the sheet.	Duplo DC-648
   OSM	The Optional Slitter Module (OSM) provides up to 8 slits per sheet in combination with standard slitter modules.	Duplo DC-648
   PFM	In the PFM (Perforation Module - Vertical) module, perforation is performed in the direction that is perpendicular to the feeding edge. If the job requires vertical perforation, a minimum of one PFM module must be available for use on the finisher. To perform vertical perforation, you must select the number of modules available on the finisher.	Duplo DC-618
   RTM	RTM or the Rotary Tool Module is an advanced vertical perforation unit that can perform two perforations at a time on the right and the left side of the printed output. A maximum of two RTMs can be installed on one finisher.	Duplo DC-618 Duplo DC-648

7. In Barcode Range Min and Barcode Range Max, specify the minimum and maximum barcode range for the finisher preset.
   Note: The barcode is used to identify the preset applied to a job. When you export a preset from the Duplo PC Controller computer, a barcode number is placed on the sheet when the job is printed. When you insert the printed output in the finisher, the scanner in the finisher scans the barcode and uses the preset number to automatically assign the correct preset to the job.