Your imposed layout can include a registration mark, a barcode, or both. These options allow automatic drift compensation and machine setup for the Duplo offline finisher.

1. In the Marks dialog box, click the Registration Mark and Barcode tab.
2. Click one of the following in the Device type field:

   • Duplo DC-646 (2-digit barcode)

   • Duplo DC-646 (3-digit barcode)

   • Custom

   • [User-installed device profile name]

3. Click one of the following in the Print field:

   • Do not print, which is the default

   • Registration mark only

   • Barcode only

   • Registration Mark and Barcode

   The options in this dropdown are displayed or hidden based on the device capabilities.
4. If you set Registration mark only, set the following:

   • Position - The location of the registration mark on the sheet.

   • Mark length and Mark width - The possible length is from 5 to 10 mm. The possible width is from 0.4 to 1.6 mm.

   • Mark Offset - Vertical and horizontal offset for the mark position. The default for both feed edge and right edge is 5 mm. The possible range is 3 to 15 mm for each.

   • Layout Offset - Amount to move the layout away from the feed edge of the sheet to accommodate the registration mark and barcode. The possible range is 0 to 30 mm.

5. If you set Barcode only, set the following:

   • Position - Barcode location on the sheet.

   • The Barcode Text and Barcode Type values vary based on the value selected from the Device type drop-down menu

     • If you set Duplo DC-646 (2-digit barcode) in the Device type field, set the following:
       • Barcode Type – Default is Code 39
       • Barcode Text - A 2-digit number from 01 to 80
     • If you set Duplo DC-646 (3-digit barcode) in the Device type field, set the following:
       • Barcode Type – Default is Code 39
       • Barcode Text - A 3-digit number up to 250
     • If you set Custom in the Device type field, set the following:
       • Barcode Type – Code 39 or Code 128
       • Barcode Text - Supports a combination alphanumeric characters and special characters. The special characters allowed are '-', '.', '$', '/', '+', '%', and '[space]'.
     • If you select a [user-installed device profile name] in the Device type field, the Barcode Type and Barcode Text values must be set according to the device specification provided by the device manufacturer.

   • Print Text - Prints the numerical representation of the barcode on the sheet.

   • Mark Offset - Vertical and horizontal offset for the barcode position. The default for feed edge is 5 mm, and the possible range is 3 to 15 mm. The default for right edge is 25 mm, and the possible range is 25 mm to 42 mm.

   • Layout Offset - Amount to move the layout away from the feed edge of the sheet to accommodate the registration mark and barcode. The possible range is 0 to 30 mm.

6. If you specified Registration Mark and Barcode, specify the settings in the Registration pane as described in steps 4 and 5.

   The settings apply for both Registration marks and barcode. In the Barcode pane, specify the text and whether to print the text.

7. Set Print mark on front surface of sheet only, if required.