Fiery Command WorkStation

Fiery XF Cut Server 3.0 Help

Hide or show navigationPrevious topicNext topicSharePrintPDF

Cut a job on a print-and-cut device

  1. Set up the job for contour cutting.
  2. Set up the print-and-cut device in the finishing settings of Fiery XF as a cutter.
  3. In Fiery XF, load a job into a workflow connected to the printer you want to use.
  4. Process and print the job in Fiery XF.

    After the job has been printed, the cut portion of the job automatically appears in the Hold queue of the Fiery XF Cut Server.

  5. Remove the printed output from the printer and load it into the print-and-cut device.
  6. Select the cut job in the Hold queue and click Send in the toolbar.
  7. Align the cutting head over the first automatic registration mark (lower right if not marked) using the controls on the front panel of the cutter.
  8. Click OK to cut the contour.
Parent topic: Contour cutting on a print-and-cut device