Setting cutter options

In the Cutter Options window of default job properties, you can control the parameters of operation of your cutter, such as cut speed and pressure, and execute common tasks, such as roll forward, roll backward, or return to origin, from your computer.

Each command can be enabled or disabled. When the command is selected, you can change the value, and it will be sent to the cutter overriding the cutter settings. When the command check box is cleared, the cutter settings are used.

Note: The settings available in the Cutter Options window vary according to your cutter. The commands and options in the following tables are examples.

Table 1. Cutter Options window commands
Option	Description
Delete	Deletes the selected command from the list. You can only delete commands that were added using the Save command.
Save	Saves the changes you made as a new command.
Reset	Reverts all settings to their default settings. Any custom commands added by the user will be deleted.

Table 2. Cutter Options window tabs
Tabs	Description
Before Job	Defines commands that will be sent before the job is processed.
	Cut Fast Medium Slow None	Defines a series of settings for fast, medium, and slow cutting speeds. Select None if you want to use only the settings from the cutter.
	Pressure Force	Defines the pressure of the knife.
	Speed	Defines the traveling speed of the head.
	Tool	Defines the tool when several tools are available or switches between cut and plot.
After Job	Defines commands that will be sent after the job is processed.
After Job	Cut Media Auto Cut	Specifies if the media will be cut after cutting or plotting.
Macro	Allows you to execute common tasks that you are usually required to do from the cutter control panel.
	Initialize	Initializes the cutter.
	Roll Forward Backward	Advances or rolls back the media.
	Go to origin	Moves the head to the origin.

Caution:

Make sure nobody is around the cutter when sending the macros since the cutter may move and injure the operator.

Fiery Command WorkStation

Fiery XF Cut Server 3.0 Help

Setting cutter options