Output size compensation allows you to measure slight variations in output size and compensate for them.

1. To set the output size compression, do one of the following:
   • Click Setup > Output Size Compression.
   • From the Setup bar, right-click one of the cutter setups or click the triangle next to the setup name and click Output Size Compression.
2. Under Test size, enter the width and length for your printed job.
3. Measure the printed size of the job and enter the width and length in the Measured size field.
4. Select the Enable output size compensation check box to automatically scale all future cuts from this setup using the compensation factors derived from your measurements.

   The software automatically calculates the compensation factors that will scale the output size to compensate for the difference between the test and the measured sizes.

5. Click OK.