A substitute color resides in a special type of spot color group called a
substitute group. For a substitute color, you specify the CMYK value of the original color and the
CMYK value of the color that substitutes for the original color.
-
Open Device Center in one
of the following ways:
- Click the More icon (three vertical dots)
next to the server name in the Servers pane.
- Double-click the server name in the Servers pane.
- Click .
- Right-click the server name and select Device Center.
-
Click Spot
Colors under Resources.
-
If a substitute group already exists, select the
substitute group and skip to 6. Otherwise, to create a substitute group, select the location in the color group
list where you want the new substitute group to be placed.
-
Click New and select Substitute Group.
-
Type a name for the group and click OK.
-
Select the location in the color list where you want the new substitute color to be
placed.
-
Click New and select Substitute Color.
-
Select a color mode for specifying the original color value.
-
Select a tolerance degree for the original color.
Tolerance determines how close a particular color must be to the original color to
match. Small and Large are defined as follows:
|
Color mode
|
Small tolerance range
|
Large tolerance range
|
|
CMYK (0-100%)
|
+/- 0.25%
|
+/- 0.5%
|
|
RGB (Device Code 0-255)
|
+/- 0.25
|
+/- 1
|
|
RGB (0-100%)
|
+/- 0.25%
|
+/- 0.5%
|
Note: Tolerance does not affect the substituted
color.
-
Type the values for the original color. Use the Tab key to move from one field to the
next.
-
Under Converted, click
Edit.
-
Type the values for the converted color and
click OK.
