Fiery Command WorkStation

Fiery Impose Plus

Hide or show navigationPrevious topicNext topicSharePrintPDF

Specify settings in the Crease tab

  1. Select the number of crease lines that you want to apply to the finished product from the No of creases list. When you select the number of creases, Crease position settings are displayed.
  2. In Crease position, specify the position of each crease on the finished product. Depending on your finisher, keep the following in mind:
    Finisher Behavior
    Duplo DC-618
    • Depending on the number of creases that you selected in the No of creases list, corresponding rows of crease positions are displayed.
    • Crease position is calculated based on the distance from the leading edge of the finish size.
    • If you select None in the No of creases list, the Crease position setting is not displayed.
    • If there are multiple finished products in the layout, the number of creases that you selected is repeated on each finished product.
    • Vertical creases are not supported.
    Duplo DC-648
    • With the CRM module, the crease option can be set to either crease down or crease up.
  3. Click Next to specify settings in the Perforation tab. If the job does not require perforation, do one of the following:
    • Click Apply to apply the settings to the job.
    • Click Publish in the Settings pane to generate a finisher preset and export the preset to the Duplo PC Controller computer.
Parent topic: Specify settings to create a finisher preset