Set printer's marks in Fiery Impose

Fiery Impose lets you set printer’s marks. You can also turn on or turn off marks and individual elements of the job label.

The location of a fold on a layout is defined by a dotted line called a fold mark; the location of a cut is defined by a solid line called a trim mark. Specialized marks also define the size and locations of margins (space surrounding the page's content area); gutters (space between pages); and bleeds (extensions of content beyond a trim mark), used to ensure that the printed area extends to the very edges of a trimmed page.

Use printer's marks to add trim, fold, and job information to all sheets in a job. The printer's marks option turns printer’s marks on globally throughout a job. Layouts display only the relevant printer's marks. If the layout does not require folding the sheet, fold marks are not displayed, even if you selected them.
Use the Marks dialog box to turn on or turn off trim marks, fold marks, and the individual elements of the job label.

Note: Printer's marks in the User Defined finish size workflow always align to the edge of the finish size.

Define printer's marks

You use the Marks dialog box to set printer’s marks.

In the Settings pane, click Define to open the Marks dialog box.
Use the Trim, Fold, Job Label, Blank Text, and Registration and Barcode tabs to specify settings.

Note: The Job Label for VDP jobs displays different information than for non-VDP jobs.

Set Trim marks

Use the Trim tab to set trim marks.

Click the Trim tab.
Select the Print trim marks checkbox.
Do any of the following:
- Set the horizontal and vertical mark length from 1 to 216 points.
- Set dotted or solid for Stroke type.
- Set Stroke width from 1/4 to 3 points.
- Set Stroke color.
- In the Horizontal Offset and Vertical Offset fields, enter values from –72 to +72 points, –1.0 to 1.0 inch, or –25.4 to 25.4 mm.
To disable or enable an individual mark, press the Ctrl key (on Windows) or Cmd key (on Mac OS X) and click the mark in the Fiery Impose window.
An "X" indicates a mark is disabled.

Set Fold marks

The Fold tab lets you set fold mark length and appearance, and disable individual marks.

In the Marks dialog box, click the Fold tab.
Select the Print fold marks checkbox.
Set any of the following:
- Set the horizontal and vertical lengths of marks from 1 to 216 points.
- Set Stroke type of Fold marks to either dotted or solid.
- Set Stroke width of Fold marks from 1/4 to 3 points.
- Set the Stroke color.
To disable or enable an individual mark, press the Ctrl key (on Windows) or Cmd key (on Mac OS X) and click the mark in the Fiery Impose window.
An "X" indicates a mark is disabled.

Set job label attributes

The Job Label tab lets you set job label content and location. (Job label content for VDP jobs differs from non-VDP jobs.)

Click the Job Label tab.
Click checkboxes (such as Job Name and Sheet Info) to display the associated information on the job label.
Sheet info for standard jobs includes the sheet number and the surface information (front/back).

For VDP jobs, you can also click the Output sheet number checkbox, which displays the absolute sheet number. If the total number of printed sheets is 500, the absolute sheet number is from 1 to 500.
Click the area where you want to place the label.
Click Horizontal or Vertical to set whether the job label is placed horizontal or vertical on the sheet.
If desired, enter offset X and Y values.
The offset is measured from the point of origin.

Set blank page text

Use the Blank Page Text tab to set what appears on implicit blank pages.

Click the Blank Page Text tab.
Enter text you want to appear on any implicit blank pages.
Select Print blank page text.

Set registration marks and barcode in Fiery Impose

Your imposed layout can include a registration mark, a barcode, or both. These options allow automatic drift compensation and machine setup for the Duplo offline finisher.

The registration mark position determines the leading edge of the sheet, as the Duplo finisher requires the mark to be on the right of the leading edge of the upper surface of the sheet.

In the Marks dialog box, click the Registration and Barcode tab.
Click one of the following in the Print field:
- Do not print, which is the default
- Registration mark only
- Barcode only
- Registration mark and barcode
If you set Registration mark only, set the following:
- Position - The location of the registration mark on the sheet.
- Mark length and Mark width - The possible length is from 5 to 10 mm. The possible width is from 0.4 to 1.6 mm.
- Mark Offset - Vertical and horizontal offset for the mark position. The default for both feed edge and right edge is 5 mm. The possible range is 3 to 15 mm for each.
- Layout Offset - Amount to move the layout away from the feed edge of the sheet to accommodate the registration mark and barcode. The possible range is 0 to 30 mm.
If you set Barcode only, set the following:
- Position - Barcode location on the sheet.
- Barcode Type - The barcode font.
- Barcode Text - A 2-digit number from 01 to 80.
- Print Text - Prints the numerical representation of the barcode on the sheet.
- Mark Offset - Vertical and horizontal offset for the barcode position. The default for feed edge is 5 mm, and the possible range is 3 to 15 mm. The default for right edge is 25 mm, and the possible range is 25 mm to 42 mm.
- Layout Offset - Amount to move the layout away from the feed edge of the sheet to accommodate the registration mark and barcode. The possible range is 0 to 30 mm.
If you specified Registration mark and barcode, specify the settings in the Registration pane as described in step 3.
The settings apply for both Registration marks and barcode. In the Barcode pane, specify the text and whether to print the text.
Set Print mark on front surface of sheet only, if required.