Measure with ES-6000
The ES-6000 spectrophotometer is an XRGA-compliant instrument that can read pages automatically and can connect to your computer through a local area network.
Before you measure pages, be sure that the ES-6000 and your computer are both connected to the same subnet of your local area network. Contact your network administrator if you are unsure.
The ES-6000 is similar to the X-Rite i1 iSis, but the ES-6000 is connected to your computer through your local area network rather than through a USB connection. The ES-6000 can be used to measure pages for multiple computers on the network. A unique ID printed on the page enables the ES-6000 to send measurements to the correct computer.
When you have successfully measured a page, you can check the measurements if desired.
- Press the button on the instrument before inserting patch page.
- When the light starts blinking, place the first measurement page in the instrument in the direction indicated on the page.
- Continue to measure the remaining measurement pages (if any) in the same manner as the first until you have measured all pages.
- After the last page has been measured, click Next.