Fiery Command WorkStation

Map

Hide or show navigationPrevious topicNext topicSharePrintPDF

Preparing SATA/NVMe drives

  1. Attach the USB to SATA/NVMe adapter to a USB 3.x port on the computer in which you installed Fiery Installer Builder.
  2. Connect the drive to the other end of the USB to SATA/NVMe adapter.
  3. Start Fiery Installer Builder.
  4. At the window listing the products, select the product image to install.
  5. From the Prepare action menu, select Prepare SATA drive.
  6. At the Select a SATA drive window, click the SATA/NVMe drive that you connected to the computer.
  7. Click Next.

    The drive will be formatted and the product image you selected will be loaded on the drive.

  8. Once the drive is prepared, remove the drive from the USB to SATA/NVMe adapter.

    You can now install the drive on the Fiery server.

    For detailed instructions on how to install the disk drives on the Fiery server, see the Installation and Service Guide.

    Note: If you are installing a drive on a Fiery server that is equipped with Fiery QuickTouch, follow the instructions shown on the Fiery LCD screen.
Parent topic: Preparing SATA or NVMe drives (Fiery NX servers only)