Fiery Command WorkStation

Map

Hide or show navigationPrevious topicNext topicSharePrintPDF

Preparing USB drive for a single product image

  1. Connect the USB drive to the host computer.
  2. Open Fiery Installer Builder.
  3. At the window listing the products, select a product from the list.
  4. From the Prepare action menu, select Prepare USB drive.
  5. Click Next.
  6. At the Select USB drive window, click the USB device you attached to the computer, and click Next.

    If more than one USB devices are displayed, make sure to select the correct USB drive that you will use for installing the system software. Different icons are displayed depending on the type of USB drive detected.

    If the USB drive is not formatted properly, a warning message appears before the USB drive is formatted. Click Yes to format the drive and proceed.

    For USB drives larger than 32 GB, go to the next section "Prepare a USB drive for multiple product images"

    Important: All data on the USB drive will be lost after format. Make sure that no valuable data resides on the device.
    Note: It will take some time to format and prepare the external USB drive for Fiery Software installation. Do not interrupt the operation.
  7. Once the preparation is completed, safely disconnect the USB drive from the computer. You can now use the USB drive to install Fiery system software on the Fiery server.
Parent topic: Preparing external USB drives for Fiery software installation