Fiery Command WorkStation

Map

Hide or show navigationPrevious topicNext topicSharePrintPDF

Installing Fiery system software using the SATA/NVMe drive

The Fiery server system software is stored in a recovery folder on the prepared replacement drive. Replace the drive on the Fiery server with the prepared SATA/NVMe drive and restore the Fiery server system software from the recovery folder on the SATA/NVMe drive.
  1. Remove all USB devices connected to the Fiery server.
  2. Shut down the Fiery server (see Installation and Service Guide for details).
  3. Remove all external cables from the Fiery server.
  4. Open the Fiery server (see Installation and Service Guide).
  5. Replace the SATA/NVMe drive on the Fiery server with the prepared replacement drive.
    • For SATA drives: Replace the drive that is connected to SATA 0 connector on the motherboard.
    • If a DVD drive is connected to the SATA 0 connector on the motherboard, replace the drive that is connected to the SATA 1 connector.
    • For NVMe drives: Replace the drive that is inserted into NVMe slot on the motherboard with the prepared NVMe drive.

    For more information, see Installation and Service Guide for your Fiery server.

  6. Reassemble the Fiery server (see Installation and Service Guide).
  7. Plug the power cable into the wall power outlet.
  8. Start the Fiery server (see Installation and Service Guide). Allow the Fiery server to start.
  9. Follow the on-screen instructions on the Fiery LCD display or through the monitor connected to the Fiery server.
Parent topic: Preparing SATA or NVMe drives (Fiery NX servers only)