Configuration report columns

The columns in the configuration report display different attributes defined or configured on your licensed Fiery servers.

The following table describes the list of attributes available in the configuration report columns:

Note: The Simple Network Management Protocol (SNMP) allows remote access to monitor the Fiery server. SNMP must be enabled on the Fiery server to fetch values for the SNMP related attributes in the configuration report.

Note: Depending upon your Original Equipment Manufacturer (OEM), the values in the Printer SN, SNMPName, and SNMPRepo columns may not be displayed for all printers.

Note: Some columns may not display any data depending on the type of your printer. Check your printer specification or contact your supplier to confirm if the specified attribute is applicable to your printer.

Note: If you make any changes or updates to the Fiery server, it may take sometime to reflect the updated data in the configuration report.

Column name	Description
Fiery Name	Name of the Fiery server as defined by the administrator
Fiery IP	Internet Protocol (IP) address of the Fiery server
MAC Address	Media Access Control (MAC) address of the Fiery server
Last update	Last time when EFI IQ fetched data from the Fiery server for the specified printer
Fiery version	Codebase version of the Fiery server
Fiery subversion	Codebase subversion of the Fiery server
JDF version	Version of the Job Definition Format (JDF) JDF describes functionality embedded within Fiery servers which facilitates cross-vendor workflow implementations of the print job.
ECC version	Installed version of EFI Cloud Connector
Disk size	Total disk space of the Fiery server in megabytes.
OS	Operating System (OS) installed on the Fiery server
Fiery SN	Serial number of the Fiery server
Printer SN	Serial number of the printer
Auto System Updates	Describes whether auto system updates are enabled for the Fiery server
Uptime	Time since the Fiery server was last rebooted
SysUTCTime	System time of the Fiery server in Coordinated Universal Time (UTC)
Timezone	Timezone in which the printer is located
DST	Only available if the printer timezone supports Daylight Saving Time (DST) The supported values are 0 and 1, where 0 represents a non-supported value and 1 represents a supported value.
SNMPReadCommunity	Specifies the community name which has access to read SNMP values
SNMPWriteCommunity	Specifies the community name which has access to write SNMP values
SNMPVersion	Version of SNMP
SNMPSysUpTime	Time in hundredths of a second (shown in epoch-based time format) since SNMP was last re-initialized
SNMPName	Name of SNMP
SNMPRepo	Internal IP address of the Fiery server through which it communicates with the printer
Cal-Expiration	Calibration expiration duration of the Fiery server
ECC Type	Type of EFI Cloud Connector The supported values are embedded and non embedded, where embedded represents that EFI Cloud Connector is installed on the Fiery server and non embedded represents that the Fiery server is onboarded on a remote machine.
Model	Name of the printer model
ECC State	State of EFI Cloud Connector The supported values are ONLINE and OFFLINE.
Cal-Plain	Last calibration values for plain calibration set
DHCP-auto	Describes whether DHCP in the Fiery WebTools is enabled The supported values are TRUE and FALSE, where TRUE represents the enabled state and FALSE represents the disabled state.
DNS-auto	Describes whether DNS in the Fiery WebTools is enabled The supported values are TRUE and FALSE, where TRUE represents the enabled state and FALSE represents the disabled state.
NTP-enabled	Describes whether NTP in the Fiery WebTools is enabled The supported values are TRUE and FALSE, where TRUE represents the enabled state and FALSE represents the disabled state. Note: NTP enables you to set the automatic date and time option.
NTP-usepool	Displays the NTP-usepool (SNTP time server name) mentioned in the Fiery WebTools

Fiery Command WorkStation

EFI IQ Help

Configuration report columns