Profile settings are attributes that determine how the Fiery server uses the profile. For example, you can assign a description or media type to a profile. Profile settings do not affect the content of the profile.

1. In Device Center, click the Resources tab, and then click Profiles.
2. Select a profile and click Settings.
3. In the Profile Settings window, set the options as needed and click OK. The selections that are available depend on the type of profile and the model of Fiery server.
   Settings common to all profiles:

   • Profile Description - A description that identifies the profile. The description cannot be changed if the profile is locked.

   Settings applicable only to output profiles:

   • Media Type - One or more media settings associated with an output profile. These settings are used when the output profile for a job is determined by its media settings (rather than set to a specific output profile).

     If Media Type is not available for your Fiery server, use Substrate Catalog or Substrate Catalog to configure media-defined profiles.

   • Calibration - The calibration to associate with an output profile.

   Settings applicable only to device link profiles:

   • CMYK Source Profile or RGB Source Profile - The source profile setting associated with a device link profile. A device link profile is selected for a job by a specific combination of source profile and output profile settings. A CMYK-to-CMYK device link profile has a CMYK Source Profile setting. An RGB-to-CMYK device link profile has an RGB Source Profile setting.

     Note: Edits made to a CMYK source profile do not apply when a device link profile associated with the CMYK source profile is used.

   • Output Profile - The output profile setting associated with a device link profile.