Fiery Command WorkStation

Fiery Command WorkStation

Hide or show navigationPrevious topicNext topicSharePrintPDF

Edit a calibration setting

You can edit the basic information of a custom calibration setting. You cannot edit a factory-supplied calibration setting.

Job properties (print settings) cannot be edited since any measurement data saved with the calibration setting would become invalid. To edit the job properties of a calibration setting, create a new calibration setting based on the existing one.

You must have Administrator privileges to edit a custom calibration setting.

  1. In Command WorkStation, click Server > Device Center.
  2. Under General, click Tools, and then click Calibrator.
  3. In Calibrator, open Calibration Manager.
  4. Select the calibration setting in the list and click Edit.
  5. Specify the following settings:

    • Name - Type a name that describes the paper name, weight, and type plus any other specific printing conditions (for example, halftone or gloss settings). The name can have a maximum of 70 characters.

    • Recommended paper - Type the name of your paper.

    • Paper reorder number - Type the product ID number for your paper. This information can usually be found on the paper packaging.

    • Comment - (Optional) Type additional descriptive information. This information appears in the list of calibration settings available on the Fiery server.

Parent topic: Calibration settings for output profiles
Related topics:
Calibration Manager
Create a custom calibration setting
Edit the calibration target