If your Fiery Server supports the Apply to All Calibration Sets option, you can copy the measurements from the calibration you are currently performing to all calibration sets on the Fiery Server or to selected calibration sets.

1. In Device Center, click General, click Tools, and click Calibrate.
2. In Calibrator, select or clear Apply to All Calibration Sets.

   • Selecting this option affects the calibration data for all calibration sets and therefore the output from all output profiles will also change. Be sure that this option is appropriate for all output profiles. For best results, each type of media should have its own calibration data.

   • Clearing this option allows you to apply the current calibration to a subset of the calibration sets on the Fiery Server. Specify the calibration sets by clicking Customize next to Apply to All Calibration Sets.

     Note: If any of the selected calibration sets are not associated with an output profile, you receive a warning but can choose to apply the measurements to that calibration set anyway.
3. Calibrate the Fiery Server.