Profile settings are attributes that determine how the Fiery Server uses the profile. For example, you can assign a description or media type to a profile. Profile settings do not affect the content of the profile.

1. In Device Center, click the Resources tab, and then click Profiles.
2. Select a profile and click Settings.
3. In the Profile Settings window, set the options as needed and click OK. The selections that are available depend on the type of profile and the model of Fiery Server.

   • Profile Description - A description that identifies the profile. The description cannot be changed if the profile is locked.

   • Label in Driver - A predefined name that the profile is associated with. If the printer driver does not have Two-Way Communication enabled, you can still select this profile using the predefined name. The label of an RGB source profile or CMYK source profile cannot be changed if the profile is locked.

   • Media Type - One or more media settings that an output profile is associated with. When the Output Profile setting for a job is set to Use Media Defined Profile, the output profile associated with the media setting of the job is used.

     If Media Type is not shown, use Paper Catalog to configure media-defined profiles. (See Paper Catalog.)

   • Calibration - The calibration to associate with an output profile.

   • CMYK Source Profile or RGB Source Profile - The source profile setting associated with a device link profile. A device link profile is selected for a job by a specific combination of source profile and output profile settings. A CMYK-to-CMYK device link profile has a CMYK Source Profile setting. An RGB-to-CMYK device link profile has an RGB Source Profile setting .

     Note: Edits made to a CMYK source profile do not apply when a device link profile associated with the CMYK source profile is used.

   • Output Profile - The output profile setting associated with a device link profile.