Fiery Command WorkStation

Configure 4

Hide or show navigationPrevious topicNext topicSharePrintPDF

Configure WINS server (name resolution)

You can specify whether to configure a WINS server automatically or manually The WINS server allows users to access network resources by name instead of IP address.

To allow the Fiery server to configure the WINS server automatically, the Fiery server IP address must also be configured automatically.

  1. From Configure, choose Network > IPv4 Address.
  2. Next to Configure WINS Server, select Automatic or Manual.
  3. If you selected Manual, then type the IP address of the Fiery server.

    The name appears on the network when users access the Fiery server through SMB (Server Message Block). This name is the same name as the Fiery server.

  4. Save your changes.
Parent topic: Configuring protocols
Related topics:
Allow the Fiery server to obtain its TCP/IP address automatically