Fiery Command WorkStation

Configure 4

Hide or show navigationPrevious topicNext topicSharePrintPDF

Restore Fiery server settings from Command WorkStation (FS400/400 Pro and later)

If you previously backed up Fiery server settings, you can restore them from Command WorkStation.

Settings can be restored to another Fiery server of the same model and version, but settings such as Server Name, IP address and Network settings are not restored; the existing settings remain untouched. This prevents problems with both Fiery servers co-existing on the same network.
  1. Connect to the Fiery server as Administrator and do one of the following:

    • Click Device Center > General > Tools > Fiery Resources and Settings.

    • Select Server > Backup and Restore.

  2. In the new web browser window that appears, click Fiery Resources and Settings.
  3. Click Restore.
  4. In the dialog box that appears, click Choose File and browse to the location of the configuration settings you want to restore and click Open. You must choose an .fbf file and a .DAT file.
  5. Click Continue.
  6. Select the items you want to restore and click Continue.
  7. After the restore operation is complete, reboot the Fiery server if you are prompted.
Parent topic: About backing up and restoring