Configure TCP/IP for Ethernet

You can specify that the Fiery server obtains its IP address automatically or set the address manually.

Note: The Fiery server stores assigned IP addresses, even if you disable TCP/IP later. If you must assign the Fiery server IP address to another device, first set the Fiery server address to the loopback address (127.0.0.1).

The Fiery server requires a unique, valid IP address. You can specify that the Fiery server obtains its IP address automatically or set the address manually. If you allow the Fiery server to obtain the IP address automatically, it also obtains the gateway address automatically.

If you want to set other kinds of IP addresses automatically, such as for a DNS or WINS server, you must allow the Fiery server to obtain its own IP address automatically.

Allow the Fiery server to obtain its TCP/IP address automatically

You can have the Fiery server obtain its IP address, subnet mask, and default gateway address automatically.

From Configure, choose Network > IPv4 Address.
Set Configure IP Address to Automatic.
Choose whether to configure the DNS Server and the WINS Server automatically or manually.
Save your changes.
If your network uses IPv6 addresses, choose Network > IPv6 Address and select Enable IPv6 Address.
Note: IPv4 must be enabled for IPv6 to work.
Save your changes.

Set TCP/IP addresses for the Fiery server manually

To set TCP/IP addresses manually, you must specify the IP address, subnet mask, and default gateway address.

From Configure, choose Network > IPv4 Address.
Set Configure IP Address to Manual.
Type the IP address, subnet mask, and default gateway address in the respective fields.
Choose whether to configure the DNS Server and the WINS Server automatically or manually.
Save your changes.
If your network uses IPv6 addresses, select Network > IPv6 Address and select Enable IPv6 Address.
Note: IPv6 requires that IPv4 is already enabled.
Save your changes.