Perform measurements to quickly compare printed color patches.
Check to make sure your supported handheld
measurement instrument is connected.
- Optional:
Click to start a new comparison.
- Optional:
If you want, load a reference or a sample file.
-
Click .
-
Follow the onscreen calibration instructions to calibrate your measurement
instrument and click Calibrate.
-
Click under the Reference or Sample
to select where you want the color measurement to appear.
-
Place the measurement instrument over the color patch you want to
measure.
-
Scan the color patch with the measurement instrument.
Fiery Verify will
automatically compare the new measurement to what is located in the Reference or Sample
columns and display the results.
-
Click Stop measurement when all desired patches have
been measured
